BGS-HL SERIES
Sensor laser
Supresor de fondo.
Carcasa de acero inoxidable.
Detección estable sin importar el color.
Precisión desde 0.08 mm.
Especificaciones
| Model | Output type | Case | 1 output type | 2 output type | ||
| Sensing distance | 20?50mm Sensing distance (display: 0.00?30.00 ?1 ) |
50?250mm (display: 0.0?200.0 ?1 ) |
20?50mm (display: 20.00?50.00) |
50?250mm (display: 50.0?250.0) |
||
| Cable type | Aluminum housing | BGS-HL05T | BGS-HL25T BGS-HL25T2 |
BGS-HDL05T | BGS-HDL25T2 | |
| SUS housing | BGS-HLM05T | BGS-HLM25T BGS-HLM25T2 |
− | − | ||
| M8 Connector type | Aluminum housing | BGS-HL05TC | BGS-HL25TC BGS-HL25TC2 |
− | − | |
| SUS housing | BGS-HLM05TC | BGS-HLM25TC BGS-HLM25TC2 |
− | − | ||
| M12 Connector type | Aluminum | − | − | BGS-HDL05TM12 | BGS-HDL25TM122 | |
| Repeatability | 0.01mm (display: 0.01) | 0.1mm (display: 0.1?2) | 0.01mm (display: 0.01) | 0.1mm (display: 0.1?2) | ||
| Minimum detectable height difference?3 | 0.08mm | 0.8mm | 0.08mm | 0.8mm | ||
| Temperature drift (typical value) | ±0.04% / ? F.S. | ±0.08% / ? F.S. | ±0.04% / ? F.S. | ±0.08% / ? F.S. | ||
| Light source | Red laser diode (wavelength 655nm) | |||||
| Output: 390μW Max. | Output: 1mW Max. | Output: 390μW Max. | Output: 1mW Max. | |||
| Spot size?4 | φ0.8mm | φ1mm | φ0.8mm | φ1mm | ||
| Response time?5 | 1.5ms Min. | |||||
| Hysteresis?6 | 0?22.49mm Adjustable | 0?149.9mm Adjustable | 0?22.49mm Adjustable | 0?149.9mm Adjustable | ||
| Adjusting sensing distance | Teaching / Manual (Selectable from: 1 point / 2 point / Zone) |
Teaching / Manual | ||||
| Indicator | Laser indicator: Green / Output indicator: Orange / Mode indicator: Red | Laser indicator: Green / Output 1, 2 indicator: Orange | ||||
| Digital display | 7 segment 4 digit LED display | |||||
| External input | Selectable from: Laser OFF, Teaching, Sample & Hold, One shot |
Selectable from: Laser OFF, Laser ON, Teaching, Sample & Hold, One shot |
||||
| Control output | Open collector (NPN / PNP selectable), 100mA Max. / DC24V (Residual voltage 1.8 V Max.) |
Open collector (NPN / PNP selectable), 50mA Max./DC24V (Residual voltage 1.8 V Max.) |
||||
| Operation mode | Selectable by setting from: Light ON / Dark ON | Selectable by setting from: Light ON / Dark ON/Zone/FGS | ||||
| Timer | Selectable from: OFF/On delay / Off delay / One shot (0~9999ms, 1ms step) | |||||
| Power supply | DC12?24V including 10% ripple (p-p) | |||||
| Current consumption?7 | 40mA max. | |||||
| Connection type | Cable type: 2m, φ4.5mm, M8 Connector type: 4pin |
Cable type: 2m, φ4.5mm M12 Connector type: 5pin with 300mm cable |
||||
| Applicable regulations |
EMC | 2014 / 30 / EU | ||||
| RoHS | 2011 / 65 / EU,MIIT Order No.32 | |||||
| Safety | 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No.50 | |||||
| Applicable standards | EN 60947-5-2:2007 / A1:2012 IEC 60825-1:2007 | |||||
| Ambient Temp./Humid. | -10 ? +50? / 35 ~ 85% RH (no condensation) | -10 ? +45? / 35 ~ 85% RH (no condensation) | ||||
| Storage Temp./Humid. | -20 ? +60? / 35 ~ 85% RH | |||||
| Ambient Temp. / Humid. | -10 ? 50? / 35 ~ 85% RH without freezing or condensation | |||||
| Storage Temp. / Humid. | -20 ? 60? / 35 ~ 85% RH | |||||
| Ambient illuminance | Incandescent lamp: 5,000 lx max. | |||||
| Vibration resistance | 10 ? 55Hz, Double amplitude 1.5mm, X,Y,Z for 2 Hours | |||||
| Shock resistance | 500m/s2(approx. 50G) X,Y,Z 3 times each | |||||
| Protection circuit | Reverse connection protection, Over current protection | |||||
| Protection category | IP67 | |||||
| Material | Case : ?Alminum type? Aluminum / ?SUS type? SUS, Front lens: PPSU, Display: PET, Cable: Oil resistant PVC | |||||
| Weight | Cable type : Approx. 90g, Connector type : 30g | |||||
| Bundled accessories | Cable type: Approx. 90g, M8 Connector type: Approx. 30g | Cable type: Approx. 100g, M12 Connector type: Approx. 60g | ||||
| Options | Mounting bracket: BEF-OD1-B (for cable type) / BEF-OD1-A (for connector type), M3 screw * 2pieces | |||||