DM-18T Series

Optex FA
Sensores para tacos o deteccion de colores, RGB, bancos de programación, seleccion automatica del color de los leds Red-Green-Blue. Dos modos de operación: detector de tacos y detector de color.
Display, timmer, claro/oscuro, hasta 8 bancos de memoria. Visualización numérica para facil configuración.

Especificaciones




Model Mark / RGB Color type
Cable type DM-18TN (or 18TP)
M8 connector type DM-18TCN (or 18TCP)
Sensing distance 18 +/- 2mm
Spot size 1 X 6 mm/18mm
Range adjustment Teach-in
Supply voltage DC10-30V including 10% ripple (P-P)
Current consumption 35mA (12V), 25mA (24V)
Response time Mark mode : H1/250μs, H2/500μs, L/1200μs
Color mode : H1/800μs, H2/1600μs, L/4000μs
Timer Off delay/On delay/One shot delay
(10msec increment : 0-990msec, 1sec increment for 1-10 sec)
Light source RGB LED
LED Indicator Output indicator (orange), Stable detection (green)
Digital indicator 7 segment, 3 digit Red and Green LED
Control output NPN or PNP open collector DC30V 100mA max
Operation mode Light/Dark On selectable
Ambient temp / humidity -25 to 55 ? / 35-95% RH
Insulation resistance 20M Ohm or more (at 500V DC)
Protection category IP67
Noise resistance IEC, CE
Vibration resistance 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X,Y, and Z directions
Shock resistance Approximately 50 G (500 m/s2), 3 times in each of the X, Y, and Z directions
Environmental illuminance Sunlight : 10,000 lux, Incandescent lamp : 3,000 lux max
Material Anti-bacterial ABS (housing), PMMA (lens)

DESCARGAS