D Series

Optex FA

La serie DR-Q permite la detección transparente y cuenta con la función AGC (Automatic Gain Control).
La serie BGS-DL está a la vanguardia de los sensores BGS, son lo último en detección de reflexión difusa.
La serie DT  es para barreras (Thru-beam) de larga distancia (máx. 100 m).

Especificaciones


 

Model Potentiometer adjustment type
Type Thru-Beam Retro reflective
Cable type DT-4000N (or 4000P) DR-500N (or 500P)
M8 connector type DT-4000CN (or 4000CP) DR-500CN (or 500CP)
Sensing distance 40 meter 5 meter
Spot size 15mm/5 meter 20mm/3.5 meter
Sensitivity adjustment 1-turn potentiometer
Supply voltage DC10-30V including 10% ripple (P-P)
Power consumption 40mA 30 mA
Response time 0.5msec
Light source Red Laser Diode 650nm, Max 2mW 4s, Class 2
LED Indicator Output indicator (orange), Laser emission (green)
Digital indicator N/A
Control output NPN or PNP open collector DC30V 100mA max
Operation mode Light/Dark On switchable
Ambient temp / humidity -10 to 50 ? / 35-95% RH
Insulation resistance 20M Ohm or more (at 500V DC)
Protection category IP67
Conformity IEC, CE
Vibration resistance 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X,Y, and Z directions
Shock resistance Approximately 50 G (500 m/s2), 3 times in each of the X, Y, and Z directions
Environmental illuminance Sunlight : 10,000 lux, Incandescent lamp : 3,000 lux max
Materials ABS (housing), PMMA (lens)





Cable type
DR-Q150TN (or Q150TP) DR-Q400TN (or Q400TP)
M8 connector type DR-Q150TCN (or Q150TCP) DR-Q400TCN (or Q400TCP)
Sensing distance 1.5 meter 4 meter
Spot size 15mm / 1.5 meter 20mm / 3.5 meter
Sensitivity adjustment Pushbutton teach with fine adjustment button
Supply voltage DC10-30V including 10% ripple (P-P)
Power consumption 35mA
Response time 0.7 msec
Timer Off delay/On delay/One shot delay (1msec increment : 0-999msec, 1sec increment for 1-10 sec)
Light source Red Laser Diode 650nm, Max 2mW 4μs, Class 2
LED Indicator Output indicator (orange), Laser emission (green)
Digital indicator 7 segment, 3 digit Red LED
Control output NPN or PNP open collector DC30V 100mA max
Operation mode Light/Dark On selectable
Ambient temp / humidity -10 to 50 ? / 35-95% RH
Insulation resistance 20M Ohm or more (at 500V DC)
Protection category IP67
Conformity IEC, CE
Vibration resistance 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X,Y, and Z directions
Shock resistance Approximately 50 G (500 m/s2), 3 times in each of the X, Y, and Z directions
Environmental illuminance Sunlight : 10,000 lux, Incandescent lamp : 3,000 lux max
Materials ABS (housing), PMMA (lens)

DESCARGAS
CONTACTANOS