CD3 Series
Optex FA
Sensor de imagen CMOS para medir el desplazamiento de alta precisión. Ajuste de span y funciones de compensación para un control flexible de la salida analógica. Alarma preestablecida de pico / límite inferior del valor analógico. La detección precisa de los objetivos de colores oscuros.
Especificaciones
| Model | Cable type | 2control output | CD33-30N / P | CD33-50N / P | CD33-85N / P | CD33-120N / P | CD33-250N / P |
| 2control output + Analog 4-20mA |
CCD33-30NA / PA | CD33-50NA / PA | CD33-85NA / PA | CD33-120NA / PA | CD33-250NA / PA | ||
| 2control output + Analog 0-10V |
CD33-30NV / PV | CD33-50NV / PV | CD33-85NV / PV | CD33-120NV / PV | CD33-250NV / PV | ||
| 1control output + RS422 |
CD33-30N-422 CD33-30P-422V |
CD33-50N-4222 CD33-50P-422 |
CD33-85N-422 CD33-85P-422 |
CD33-120N-422 CD33-120P-422 |
CD33-250N-422 CD33-250P-422 |
||
| Connector type | 2control output | CD33-30CN / CP | CD33-50CN / CP | CD33-85CN / CP | CD33-120CN / CP | CD33-250CN / CP | |
| 2control output + Analog 4-20mA |
CD33-30CNA / CPA | CD33-50CNA / CPA | CD33-85CNA / CPA | CD33-120CNA / CPA | CD33-250CNA / CPA | ||
| 2control output + Analog 0-10V |
CD33-30CNV / CPV | CD33-50CNV / CPV | CD33-85CNV / CPV | CD33-120CNV / CPV | CD33-250CNV / CPV | ||
| 1control output + RS422 |
CD33-30CN-422 CD33-30CP-422 |
CD33-50CN-422 CD33-50CP-422 |
CD33-85CN-422 CD33-85CP-422 |
CD33-120CN-422 CD33-120CP-422 |
CD33-250CN-422 CD33-250CP-422 |
||
| Control output | N = NPN output, P = PNP output | ||||||
| Measurement range | 30±4mm | 50±10mm | 85±20mm | 120±60mm | 250±150mm | ||
| Full scale | 8mm | 20mm | 40mm | 120mm | 300mm | ||
| Light source | Red laser diode (wave length 655nm) | ||||||
| Peak power | 1mW max. | ||||||
| IEC/JIS Class | Class 2 | ||||||
| FDA CLASS | CLASS ? | ||||||
| Spot size (approx.volume) (*1) | Near | 0.15×0.15mm | 0.6×1.2mm | 0.9×1.5mm | 1.2×1.8mm | 1.5×2.5mm | |
| Middle | 0.1×0.1mm | 0.5×1.0mmm | 0.75×1.25mm | 1.0×1.5mm | 1.75×3.5mm | ||
| Far | 0.15×0.15mm | 0.4×0.9mm | 0.6×1.0mm | 0.5×0.8mm | 2.0×4.5mm | ||
| Linearity (*2) | ±0.1% F.S. | ±0.3% F.S. | |||||
| Resolution (*3) | Fast | 4μm | 8μm | 15μm | 45μm | 100μm | |
| Other | 2μm | 5μm | 10μm | 30μm | 75μm | ||
| Temp drift | ±0.08%F.S. / ? | ||||||
| Response time (*4) | Fast | 1ms+ selecting sensitivity (averaging : 1) | 1.5ms+ selecting sensitivity (averaging : 1) | ||||
| Standard | 8.5ms+ selecting sensitivity (averaging : 16) | 13ms+ selecting sensitivity (averaging : 16) | |||||
| High resolution | 32.5ms+ selecting sensitivity (averaging : 64) | 49ms+ selecting sensitivity (averaging : 64) | |||||
| Selecting sensitivity | 4ms max. | ||||||
| Indicators | Distance indicator | bar graph LED | |||||
| Output indicator | ON status : Orange | ||||||
| Protection category | IP67 | ||||||
| Ambient temp / humidity | ?10?+45? / 35?85%RH (No condensation or freezing) | ||||||
| Storage temp / humidity | ?20?+60? / 35?95%RH (No condensation or freezing) | ||||||
| Ambient illuminance | Sun light : 10,000lx max. Incandescent lamp : 3,000lx max. | ||||||
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 h for XYZ axis | ||||||
| Shock resistance | 50G (500m/s2) | ||||||
| Cable extension | Up to 10m using an optional extension cable | ||||||
| Material | PBT (Case) PMMA (Front window) | ||||||
| Weight | Cable type | approx.65g (without cable) | |||||
| Connector type | approx.70g | ||||||
| Model | 2 Control output | + Analog 4-20mA | + Analog 0-10V | 1 Control output + RS422 | |
| Supply voltage | 12 - 24VDC ?-5%, +10%? | 18 - 24VDC ?-5%, +10%? | 12 - 24VDC ?-5%, +10%? | ||
| Current consumption | max. 55mA (24VDC) | max. 85mA (24VDC) | max. 55mA (24VDC) | ||
| Output | Control output 1 | NPN / PNP open collector 100mA max. / 30VDC ?residual voltage max. 1.8V? | ? | ||
| Control output 2 | NPN / PNP open collector 100mA max. / 30VDC ?residual voltage max. 1.8V? | ||||
| Analog output | ? | 4-20mA | 0-10V | ? | |
| Interface | ? | RS422 | |||
| Cable type | Dia : 5mm 5core 2m AWG24 ?PVC? | Dia : 5mm 6core 2m AWG24 ?PVC? | Dia : 5mm 8core 2m AWG24 ?PVC? | ||
| Connector type | M12 8pin | ||||
*1 Defined with center strength 1/e2?13.5??. There may be leak light other than the specified spot size. The sensor may be affected when there is a highly reflective object around the targets.
*2 Averaging : 64?High resolution?, Object : white ceramic.
*3 Middle of measuring range, Object : white ceramic.
*4 Response time : response time plus selecting sensitivity time.
| Model | Cable type | 2control output + Analog 4-20mA |
CD33-L30NA / PA | CD33-L50NA / PA | CD33-L85NA / PA |
| 2control output + Analog 0-10V |
CD33-L30NV / PV | CD33-L50NV / PV | CD33-L85NV / PV | ||
| 1control output + RS422 |
CD33-L30N-422 / P-422 | CD33-L50N-422 / P-422 | CD33-L85N-422 / P-422 | ||
| Connector type | 2control output + Analog 4-20mA |
CD33-L30CNA / CPA | CD33-L50CNA / CPA | CD33-L85CNA / CPA | |
| 2control output + Analog 0-10V |
CD33-L30CNV / CPV | CD33-L50CNV / CPV | CD33-L85CNV / CPV | ||
| 1control output + RS422 |
CD33-L30CN-422 / CP-422 | CD33-L50CN-422 / CP-422 | CD33-L85CN-422 / CP-422 | ||
| Control output | N = NPN open collector, P = PNP open collector | ||||
| Measurement range | 26.3±2mm | 47.3±5mm | 82.9±10mm | ||
| Full scale | 4mm | 10mm | 20mm | ||
| Light source | Red laser diode, 655nm | ||||
| Peak power | 390μW max. | ||||
| IEC/JIS Class | Class 1 | ||||
| FDA CLASS | CLASS ? | ||||
| Spot size (approx.volume) (*1) |
Near | 0.15×0.15mm | |||
| Middle | 0.1×0.1mm | ||||
| Far | 0.15×0.15mm | ||||
| Linearity (*2) | ±0.2% F.S. | ||||
| Resolution (*3) | 1μm | 2.5μm | 5μm | ||
| Temp drift | ±0.08%F.S. / ? | ||||
| Response time (*4) | Fast | 1ms+ selecting sensitivity (averaging : 1) | |||
| Standard | 8.5ms+ selecting sensitivity (averaging : 16) | ||||
| High resolution | 32.5ms+ selecting sensitivity (averaging : 64) | ||||
| Selecting sensitivity | 4ms max. | ||||
| Indicators | Distance indicator | bar graph LED | |||
| Output indicator | ON status : Orange | ||||
| Protection category | IP67 | ||||
| Ambient temp / humidity | ?10?+45? / 35?85%RH (without condensing) | ||||
| Storage temp / humidity | ?20?+60? / 35?95%RH (without condensing) | ||||
| Ambient illuminance | Incandescent lamp : 3,000lx max. | ||||
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 h for XYZ axis | ||||
| Shock resistance | 50G (500m/s2) XYZ 3times | ||||
| Cable extension | Up to 10m using an optional extension cable | ||||
| Material | PBT (Case) PMMA (Front window) | ||||
| Weight | Cable type | approx.65g (without cable) | |||
| Connector type | approx.70g | ||||