CD1 Series
Optex FA
PSD (dispositivo sensor de posición) del sistema óptico. Autónomo de desplazamiento del sensor láser. Enseñanza Remota de entrada para una mayor flexibilidad. Bueno para aplicaciones OEM.
Especificaciones
Model | Cable | CD1-30N / P | CD1-50N / P | CD1-100N / P | CD1-130N / P | CD1-250N / P |
M12 Connector | CD1-30CN / CP | CD1-50CN / CP | CD1-100CN / CP | CD1-130CN / CP | CD1-250CN / CP | |
Transistor output | N = NPN output, P = PNP output | |||||
Measurement range | 30 ±4mm | 50 ±10mm | 100 ±35mm | 130 ±50mm | 250 ±150mm | |
Full scale | 8mm | 20mm | 70mm | 100mm | 300mm | |
Light source | Class 2 laser, 650nm, max 3.3mW | |||||
Spot size | φ0.1mm | φ0.5mm | 0.5×1.2 mm | 0.5×1.5 mm | 0.8×1.2 mm | |
Supply voltage | 12 - 24VDC ??5 to ?10%? | |||||
Power consumption | Max 120mA ?12VDC?, 75mA ?24VDC?, including analog output current | |||||
Resolution ?typical value? | ?Unit : Micron. Under AUTO sensitivity. White ceramic as an object? | |||||
?Response speed 100msec? | 1 | 3 | 15 | 20 | 150 | |
?Response speed 10msec? | 3 | 10 | 50 | 70 | 500 | |
?Response speed 1msec? | 10 | 30 | 150 | 200 | 1500 | |
Linearity | ±2% F.S. | ±1% F.S. | ±2% F.S. | ±3.5% F.S. | ±5% F.S. | |
Temp drift | ±0.02% F.S. / Celsius | |||||
Response time | 100msec / 10msec / 1msec selectable | |||||
Sensitivity adjustment | SET / FIX / AUTO | |||||
Analogue output | 4-20mA | |||||
Control output | NPN or PNP, Max 100mA / 30VDC, Residual voltage max 1.8V | |||||
Distance indicator | Red = Near, Orange = Middle, Green = Far, Red / Green = Error *Remark : Errors as "out of measuring range", "Too high reflection", etc |
|||||
Stability indicator | Green = Stable, Red = Error, No light = Unstable, need adjustment | |||||
Output indicator | Orange = Output | |||||
Teach-in indicator | Green = Input, Red = Error | |||||
Blanking input | NPN = Gray wire to 0V, PNP = Gray wire to ?V | |||||
Delay function | Off delay 40msec | |||||
Environmental illuminance | Sun light : Max 10,000 lux, Incandescent Lamp = Max 3,000 lux | |||||
Ambient temp | -10 oC to +40 oC | |||||
Ambient humidity | 35% to 95% RH | |||||
Material | Zinc diecast | |||||
Protection category | IP67 | |||||
Conformity | CE | |||||
Warm-up time | 30 minutes | |||||
Weight | Approx.130g ?Without cable? |