Optex CD1 Series

PSD (dispositivo sensor de posición) del sistema óptico.
PSD (dispositivo sensor de posición) del sistema óptico. Autónomo de desplazamiento del sensor láser. Enseñanza Remota de entrada para una mayor flexibilidad. Bueno para aplicaciones OEM.

Especificaciones






Model Cable CD1-30N / P CD1-50N / P CD1-100N / P CD1-130N / P CD1-250N / P
M12 Connector CD1-30CN / CP CD1-50CN / CP CD1-100CN / CP CD1-130CN / CP CD1-250CN / CP
Transistor output N = NPN output, P = PNP output
Measurement range 30 ±4mm 50 ±10mm 100 ±35mm 130 ±50mm 250 ±150mm
Full scale 8mm 20mm 70mm 100mm 300mm
Light source Class 2 laser, 650nm, max 3.3mW
Spot size φ0.1mm φ0.5mm 0.5×1.2 mm 0.5×1.5 mm 0.8×1.2 mm
Supply voltage 12 - 24VDC ??5 to ?10%?
Power consumption Max 120mA ?12VDC?, 75mA ?24VDC?, including analog output current
Resolution ?typical value? ?Unit : Micron. Under AUTO sensitivity. White ceramic as an object?
?Response speed 100msec? 1 3 15 20 150
?Response speed 10msec? 3 10 50 70 500
?Response speed 1msec? 10 30 150 200 1500
Linearity ±2% F.S. ±1% F.S. ±2% F.S. ±3.5% F.S. ±5% F.S.
Temp drift ±0.02% F.S. / Celsius
Response time 100msec / 10msec / 1msec selectable
Sensitivity adjustment SET / FIX / AUTO
Analogue output 4-20mA
Control output NPN or PNP, Max 100mA / 30VDC, Residual voltage max 1.8V
Distance indicator Red = Near, Orange = Middle, Green = Far, Red / Green = Error
*Remark : Errors as "out of measuring range", "Too high reflection", etc
Stability indicator Green = Stable, Red = Error, No light = Unstable, need adjustment
Output indicator Orange = Output
Teach-in indicator Green = Input, Red = Error
Blanking input NPN = Gray wire to 0V, PNP = Gray wire to ?V
Delay function Off delay 40msec
Environmental illuminance Sun light : Max 10,000 lux, Incandescent Lamp = Max 3,000 lux
Ambient temp -10 oC to +40 oC
Ambient humidity 35% to 95% RH
Material Zinc diecast
Protection category IP67
Conformity CE
Warm-up time 30 minutes
Weight Approx.130g ?Without cable?

DESCARGAS