J Series
Optex FA
Al estar la carcasa del sensor rellena de epoxi proporciona índice IP67G contra el agua.
100G de resistencia a los golpes.
Conector M8 y salida a cable disponible para todos los modelos.
Especificaciones
| Model | Thru-beam | Retro-Reflection | Diffuse Reflection | Limited range (convergent) | Wide angle (divergent) | |
| Cable type | NPN | JT-H(S)1000N(R) | JR-H(S)300N | JD-H(S)R80N | JD-H(S)L03N | JD-H(S)W08N |
| PNP | JT-H(S)1000P(R) | JR-H(S)300P | JD-H(S)R80P | JD-H(S)L03P | JD-H(S)W08P | |
| Connector type | NPN | JT-H(S)1000CN(R) | JR-H(S)300CN | JD-H(S)R80CN | JD-H(S)L03CN | JD-H(S)W08CN |
| PNP | JT-H(S)1000CP(R) | JR-H(S)300CP | JD-H(S)R80CP | JD-H(S)L03CP | JD-H(S)W08CP | |
| Sensing distance | 10m |
3m | 80cm | 2-5cm | 8cm | |
| Response time | 0.5msec Max | |||||
| Operation mode | Light on / Dark on selectable | |||||
| Hysteresis | NIL | 20% Max | ||||
| Light source | Red LED / Infrared | Red LED | ||||
| Control output | NPN or PNP Open collector, 100mA Max / 30V DC | |||||
| Supply voltage | DC 10 to 30V including 10% of ripple | |||||
| Conformity | JIS / C4525, CE, UL | |||||
| Power consumption | Emitter?20mA, Receiver 15mA | 20mA Max | ||||
| Sensitivity adjustment | 2-turn Potentiometer | |||||
| Indicator | 2 indicator, Output (Orange), Stable (Green) | |||||
| Protection category | IEC 144 IP67, JEM IP67g | |||||
| Shock resistance | Approximately 100 G (1000 m/s2), 3 times in each of the X, Y, and Z directions | |||||
| Environmental illuminance | Sunlight : 10,000 lux Max, Incandescent lamp : 3,000 lux Max. | |||||
| Material | PBT (Case), PC (Lens) | |||||
